For equipment such as linear motion bearings, accuracy is often required. Once installed, used or maintained improperly, various problems may occur. For example, when using linear motion bearings, there is a problem of excessive shaking. How is this going? Let's briefly analyze the reasons. The main reasons for the swing of linear motion bearings are as follows:
1. Loose mounting bolts will cause shaking during work. If the linear motion bearing shakes during operation, check all the mounting bolts of the inner and outer rings immediately. Check for looseness and tighten as required.
2. The rigidity of the steel structure supporting the linear motion bearing is insufficient, resulting in elastic deformation during loading, resulting in the overall shaking of the linear motion bearing, and the strength of the steel structure supporting the linear motion bearing is increased by 14 times.
3. Check whether the operation is overloaded. Overloading will also cause the linear motion bearing to shake. Therefore, it must be carried out strictly according to the regulations.
4. Overload operation in the period causes the raceway to collapse and the clearance is too large. In this case, please notify the linear motion bearing to adjust in time after sales to ensure the normal use of the linear motion bearing. In short, in order to ensure the normal use of linear motion bearings, if there is shaking during use, it is necessary to stop the machine for inspection in time to prevent the linear motion bearings from being damaged due to long-term shaking.